Yakima River Basin Water Storage Feasibility Study

Home | Reports/Documents | News Releases | Photos | Email List | Contact Us

Bathymetry Survey - USGS (2005)

Metadata:

Identification_Information:

Citation:
Citation_Information:
Originator: UCAO; Bureau of Reclamation
Publication_Date: 08/26/2008
Publication_Time: Unknown
Title: YFO_LiDAR_bathymetry_2004_2005
Geospatial_Data_Presentation_Form: vector digital data
Online_Linkage: \\IBR1EYOUNGD01\C$\Data_2_SDE_prep\UCAO_Topography_GIS_DB.gdb

Description:
Abstract:
Bathymetric LiDAR collected on seven reaches (Easton, Upper Kittitas, Lower Kittitas, Naches, Sunnyside, Prosser, Chandler) of the Yakima River Basin in 2004 and 2005.

Purpose: To create an elevation model in support of the Yakima River Basin Water Storage Feasability Study (YRBWSFS) hydraulic modeling effort. The hydraulic modeling was conducted to help determine fish habitats at different flow levels.

Time_Period_of_Content:
Time_Period_Information:
Range_of_Dates/Times:
Beginning_Date: 200409
Beginning_Time: unknown
Ending_Date: 200505
Ending_Time: unknown

Currentness_Reference: ground condition

Status:
Progress: Complete
Maintenance_and_Update_Frequency: None planned

Spatial_Domain: Bounding_Coordinates:
West_Bounding_Coordinate: -121.183644
East_Bounding_Coordinate: -119.503566
North_Bounding_Coordinate: 47.243214
South_Bounding_Coordinate: 46.187999

Keywords:
Theme:
Theme_Keyword_Thesaurus: None
Theme_Keyword: LiDAR
Theme_Keyword: Topography
Theme_Keyword: Elevation
Theme_Keyword: Contour
Theme_Keyword: bathymetry

Place:
Place_Keyword_Thesaurus: None
Place_Keyword: Pacific Northwest
Place_Keyword: Washington
Place_Keyword: Yakima Basin

Access_Constraints:
The USDI Bureau of Reclamation (Reclamation) provides public domain spatial data without restrictions. Access to spatial data that are considered 1) works in-progress, 2) for internal use, or 3) confidential, sensitive, or private may be restricted. Access to such data may require a Freedom of Information Act (FOIA) request. For further information, contact the Geospatial Data Administrator (see Point of Contact info).

Use_Constraints:
The USDI Bureau of Reclamation (Reclamation) provides spatial data """"""""as-is"""""""" without warranty of any kind, expressed or implied, including but not limited to, any warranties of fitness for a particular purpose. The burden for determining fitness for use lies entirely with the user. In no event will the producers of Reclamation spatial data be liable for any damages arising from the use of, or the inability to use, these data. The user assumes all responsibility for spatial and attribute accuracy, completeness, validity, and appropriateness with regard to the suitability of these spatial data for any specific use or application, and such use or application is at the user's own risk.

Point_of_Contact:
Contact_Information:
Contact_Organization_Primary:
Contact_Organization: Upper Columbia Area Office, USDI Bureau of Reclamation
Contact_Person: UCAO GIS Coordinator
Contact_Position: GIS Specialist
Contact_Address:
Address_Type: mailing and physical address
Address: US Bureau of Reclamation Box 1749 1917 Marsh Road
City: Yakima
State_or_Province: WA
Postal_Code: 98907-1794
Country: USA

Contact_Voice_Telephone: 509-575-5848
Contact_Facsimile_Telephone: 509-454-5611
Contact_Electronic_Mail_Address: eyoung@pn.usbr.gov

Hours_of_Service: 0730-1600
Contact_Instructions:

Data_Set_Credit:
Reclamation's Technical Service Center
Native_Data_Set_Environment: Microsoft Windows XP Version 5.1 (Build 2600) Service Pack 2; ESRI ArcCatalog 9.3.0.1770

Data_Quality_Information:
Attribute_Accuracy:
Attribute_Accuracy_Report:
The only attributes refer to the z coordinates or reach locations. The attribute accuracies for the z coordinates are directly tied to the accuracy of the data set. These attributes were cross checked by TSC; Reclamation employees for correctness. The reach locations were added by UCAO; Reclamation employees and double checked.

Logical_Consistency_Report:
All data collection was conducted by the same source (Fugro Pelagos,Inc). The finished data was cross checked by TSC; Bureau of Reclamation staff for correctness. As part of the process, data was compared against field surveys conducted at the same time as the data collection flight. For further information, see the 'Process' description.

Completeness_Report:
Data set was created to cover portions of the Yakima and Naches River. The areas designated were completely covered.

Positional_Accuracy:
Horizontal_Positional_Accuracy:

Horizontal_Positional_Accuracy_Report:
The horizontal accuracy value is based on the published accuracies for the equipment used. However, it is believed that the accuracy values are greater than those listed.

Quantitative_Horizontal_Positional_Accuracy_Assessment:
Horizontal_Positional_Accuracy_Value: 0.25
Horizontal_Positional_Accuracy_Explanation: Published accuracies for the SHOALS-1000T equipment.

Vertical_Positional_Accuracy:
Vertical_Positional_Accuracy_Report:
The vertical accuracy value is based on the published accuracies for the equipment used. However, it is believed that the accuracy values are greater than those listed. The following is a summary of the accuracies found by comparing the raw data to surveyed locations. Median values of the residuals from the statistical analysis range from 0.492 feet (0.15 m) to 0.853 feet (0.26 m).

This data has been corrected to take into account the amount equal to the median value of the residuals of each reach obtained by subtracting the LiDAR elevations from the ground truth elevations. For more information, see the process section. The elevational accuracy value could therefore be closer to 0.1.

Quantitative_Vertical_Positional_Accuracy_Assessment:

Vertical_Positional_Accuracy_Value: 0.25
Vertical_Positional_Accuracy_Explanation: Published accuracies for the SHOALS-1000T equipment.

Lineage: Source_Information:
Source_Citation:
Citation_Information:
Title: empty
Source_Time_Period_of_Content:
Time_Period_Information:
Single_Date/Time:
Calendar_Date: unknown
Time_of_Day: unknown

Source_Contribution: All original mapping data.

Process_Step:

Process_Description:

This bathymetry was collected and processed by Fugro Pelagos,Inc. using a SHOALS-1000T LASER (manufactured by Optech, Inc.) sensor capable of penetrating water using a blue-green LASER. Terrestrial measurements are also possible with this unit although none was acquired with this bathymetry. The data was processed with Optech software using what is being called the "Inland Water Algorithm". This algorithm was developed to process those returns from depths from less than approximately 4.9 feet (1.5 meters). The "Inland Water Algorithm" processes data acquired from depths to approximately 13 feet (4 m). The Sept. 2004 data was the first application of this algorithm and use of the SHOALS-1000T in shallow water riverine environments.

The published specification and accuracies for the SHOALS-100T are as follows: The SHOALS-1000T is capable of recording x-y-z data at a rate of 1000 Hz with a sounding density of 6.6x6.6, 9.8x9.8, 13.1x13.1 and 16.4x16.4 feet (2x2, 3x3, 4x4 or 5x5 m). The point data for the bathymetry meets Order 1 accuracy standards of the International Hydrographic Organization (IHO) with a horizontal accuracy of 8.2 feet (2.5 m) and a vertical accuracy of 0.8 feet (0.25 m, 1 sigma). For more information regarding instrument specifications visit http://www.optech.on.ca. This site also contains information on the history of the development of the SHOALS unit. For more information on hydrographic surveying accuracies and the IHO refer to chapter two of the U.S. Army Corps of Engineers Hydrographic Survey manual at http://www.usace.army.mil/inet/usace-docs/eng-manuals/em1110-2-1003/toc.htm.

It is likely that water clarity is the single most limiting factor for collecting bathymetric data with LiDAR. The minimum required clarity is measured with a Secchi disc and is called the Secchi depth. A Secchi disc is available in various weights and diameters (approximately 8 - 20 inches, 20 - 50 cm) with the circle typically divided into four evenly divided pie-shaped wedges in alternating black and white. The Secchi depth is determined by lowering the disc into the water column and recording the depth at which the black and white portions of the disc can no longer be distinguished. The minimum visibility requirement for successful LiDAR penetration using the SHOALS-1000T is 2.5 times the Secchi depth up to a depth of 164 ft (50 m) (www.optech.on.ca).

The LASER is not capable of penetrating the water column where bubbles are present, such as white water conditions. The LASER is also incapable of penetrating vegetation, whether that vegetation is growing under the water surface or overhanging above the surface. These limitations are very similar to the limitations of SONAR when operated from a boat. Bubbles foul acoustic signals to the same extent as optic signals. Overhanging vegetation or tall vegetation near the channel banks often prohibits the reception of a sufficient number of satellites or signal from the base station when performing a SONAR survey with RTK GPS surveying equipment.

Ground truth data was collected with RTK GPS at a minimum of one location per reach flown. For the Lower Kittitas data set, there was additional survey data to use for comparison that was collected in August 2003 by SONAR and RTK GPS surveying equipment mounted on a raft. Using these data, a statistical analysis was performed for each data set to determine precision and accuracy. From these analyses conclusions were made regarding the bias and recommended adjustments to the data.

It was determined that the best method for adjusting the elevations provided by the LiDAR is to correct by an amount equal to the median value of the residuals obtained by subtracting the LiDAR elevations from the ground truth elevations. Reasons for the bias are currently unknown and will be investigated by personnel at Reclamation, Fugro Pelagos and Optech. The advertised precision of the LiDAR is +/- 0.83 feet (0.25 m). Standard deviations from the statistical analysis range from 0.492 feet (0.15 m) to 0.853 feet (0.26 m).

The following is a statistical description of the data comparison (in meters): Chandler Reach: mean = 0.19; median = 0.23; standard deviation = 0.18; number of samples = 375; RMSE = 0.26 Easton Reach: mean = 0.15; median = 0.14; standard deviation = 0.22; number of samples = 163; RMSE = 0.27 Lower Kittitas Reach: mean = 0.24; median = 0.26; standard deviation = 0.35; number of samples = 56; RMSE = 0.42 Upper Kittitas Reach: mean = 0.19; median = 0.20; standard deviation = 0.12; number of samples = 374; RMSE = 0.23 Naches Reach: mean = 0.26; median = 0.27; standard deviation = 0.11; number of samples = 341; RMSE = 0.29 Prosser Reach: mean = 0.17; median = 0.16; standard deviation = 0.15; number of samples = 407; RMSE = 0.22 Sunnyside Reach: mean = 0.16; median = 0.14; standard deviation = 0.15; number of samples = 358; RMSE = 0.22 The data has already been corrected by the recommended amounts.

Process_Contact:

Contact_Information:
Contact_Organization_Primary:
Contact_Organization:
ReclamationContact_Person:
Hydrologic Engineer

Contact_Address:
Address_Type: mailing and physical address
Address: Sixth and Kipling; Building 67; Room 152
City: Denver
State_or_Province: CO
Postal_Code: 80225-0007
Country: USA

Contact_Voice_Telephone: 303-445-2073
Contact_Facsimile_Telephone: 303-445-6301

Cloud_Cover: Unknown

Spatial_Data_Organization_Information:
Direct_Spatial_Reference_Method:
VectorPoint_and_Vector_Object_Information:

SDTS_Terms_Description:

SDTS_Point_and_Vector_Object_Type: Entity
pointPoint_and_Vector_Object_Count: 3748897

Spatial_Reference_Information:

Horizontal_Coordinate_System_Definition:
Planar:
Map_Projection:
Map_Projection_Name:
Lambert Conformal Conic
Lambert_Conformal_Conic:

Standard_Parallel: 45.833333
Standard_Parallel: 47.333333
Longitude_of_Central_Meridian: -120.500000
Latitude_of_Projection_Origin: 45.333333
False_Easting: 1640416.666667
False_Northing: 0.000000

Planar_Coordinate_Information:

Planar_Coordinate_Encoding_Method: coordinate pair
Coordinate_Representation:

Abscissa_Resolution: 0.000328
Ordinate_Resolution: 0.000328

Planar_Distance_Units: survey feet

Geodetic_Model:

Horizontal_Datum_Name: North American Datum of 1983
Ellipsoid_Name: Geodetic Reference System 80
Semi-major_Axis: 6378137.000000
Denominator_of_Flattening_Ratio: 298.257222

Vertical_Coordinate_System_Definition:
Altitude_System_Definition: Altitude_Datum_Name: North American Vertical Datum of 1988
Altitude_Distance_Units: feet

Entity_and_Attribute_Information:

Detailed_Description:

Entity_Type:
Entity_Type_Label: YFO_LiDAR_bathymetry_2004_2005

Attribute:
Attribute_Label: OBJECTID
Attribute_Definition: Internal feature number.
Attribute_Definition_Source: ESRI
Attribute_Domain_Values:

Unrepresentable_Domain:
Sequential unique whole numbers that are automatically generated.

Attribute:
Attribute_Label: Shape
Attribute_Definition: Feature geometry.
Attribute_Definition_Source: ESRI
Attribute_Domain_Values:

Unrepresentable_Domain: Coordinates defining the features.

Attribute:
Attribute_Label: elevation
Attribute_Definition: z coordinate in the NAVD 88 vertical coordinate system
Attribute_Domain_Values:

Range_Domain: Range_Domain_Minimum: 466
Range_Domain_Maximum: 2140
Attribute_Units_of_Measure: feet

Attribute:
Attribute_Label: ELEVATION

Attribute:
Attribute_Label: Elevation_Uncorrected
Attribute_Definition: uncorrected z coordinate in the NAVD 88 vertical coordinate system

Attribute:
Attribute_Label: LOCATION
Attribute_Definition: name of the reach the data is located within
Attribute_Domain_Values:

Codeset_Domain:
Codeset_Name: Easton

Attribute_Domain_Values:
Codeset_Domain:
Codeset_Name: Easton
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value:
ChandlerEnumerated_Domain:
Enumerated_Domain_Value:
EastonEnumerated_Domain:
Enumerated_Domain_Value: Lower Kittitas
Enumerated_Domain:
Enumerated_Domain_Value: Upper Kittitas
Enumerated_Domain:
Enumerated_Domain_Value: Prosser
Enumerated_Domain:
Enumerated_Domain_Value: Naches
Enumerated_Domain:
Enumerated_Domain_Value: Sunnyside
Attribute_Domain_Values:
Enumerated_Domain:

Overview_Description:

Entity_and_Attribute_Overview: Attributes consist of the x, y, z locational coordinates.

Distribution_Information:

Distributor:
Contact_Information: Contact_Organization_Primary:
Contact_Organization: Upper Columbia Area Office, USDI Bureau of Reclamation
Contact_Position: GIS Specialist
Contact_Address:

Address_Type: mailing and physical address
Address: US Bureau of Reclamation Box 1749 1917 Marsh Road
City: Yakima
State_or_Province: WA
Postal_Code: 98907-1794
Country: USA

Contact_Voice_Telephone: 509-575-5848
Contact_Facsimile_Telephone: 509-454-5611
Contact_Electronic_Mail_Address: eyoung@pn.usbr.gov
Hours_of_Service: 0730-1600
Contact_Instructions:

Resource_Description: Downloadable Data
Distribution_Liability:
The USDI Bureau of Reclamation (Reclamation) provides spatial data ""as-is"" without warranty of any kind, expressed or implied, including but not limited to, any warranties of fitness for a particular purpose. The burden for determining fitness for use lies entirely with the user. In no event will the producers of Reclamation spatial data be liable for any damages arising from the use of, or the inability to use, these data. Reclamation liability is limited to providing a replacement copy for requested data sets that are not readable upon receipt.

The user assumes all responsibility for spatial and attribute accuracy, completeness, validity and appropriateness with regard to the suitability of these spatial data for any specific use or application, and such use or application is at the user's own risk.

Spatial data provided by the Reclamation are public domain, and the recipient may not assert any proprietary rights thereto nor represent data sets as other than government-produced data.

Standard_Order_Process:
Fees: No fees for electronic download. Processing, media, and shipping fees may apply for CD-ROM requests.
Ordering_Instructions: Contact Geospatial Data Administrator or GIS Coordinator for custom data requests.
Turnaround: Processing time and delivery will vary depending on the size and complexity of the request.
Standard_Order_Process:
Fees: Actual costs to produce cartographic products, including labor, plotting costs, and shipping.
Ordering_Instructions: Contact the Geospatial Data Administrator or GIS Coordinator to request non-digital data products.
Turnaround: Processing time will vary with the specific request.
Custom_Order_Process: Contact Geospatial Data Administrator or GIS Coordinator for custom data requests.
Available_Time_Period:
Time_Period_Information:
Single_Date/Time: Calendar_Date: unknown
Time_of_Day: unknown

Metadata_Reference_Information:

Metadata_Date: 20081201
Metadata_Review_Date: 20030304
Metadata_Contact:

Contact_Information:
Contact_Organization_Primary:
Contact_Organization: Upper Columbia Area Office, USDI Bureau of Reclamation
Contact_Person: REQUIRED: The person responsible for the metadata information.

Contact_Position: GIS Specialist
Contact_Address:
Address_Type: mailing and physical address
Address: US Bureau of Reclamation Box 1749 1917 Marsh Road City: Yakima
State_or_Province: WA
Postal_Code: 98907-1794
Country: USA
Contact_Voice_Telephone: 509-575-5848
Contact_Facsimile_Telephone: 509-454-5611
Contact_Electronic_Mail_Address: eyoung@pn.usbr.gov
Hours_of_Service: 0730-1600
Contact_Instructions:

Metadata_Standard_Name: FGDC Content Standards for Digital Geospatial Metadata
Metadata_Standard_Version: FGDC-STD-001-1998
Metadata_Time_Convention: local time

Generated by mp version 2.9.6 on Mon Dec 01 10:04:59 2008

Last Updated: 8/19/20