Bureau of Reclamation Banner

Mountain Park Dam

Photo of Mountain Park Dam
 
Related Projects & Facilities
Mountain Park Project
Bretch Diversion Dam
 
Related Links
Schedule of Proposed NEPA Actions
Recreation.gov
Map this dam
 
Printable View
 
Overview General Dimensions Hydraulics & Hydrology Contact Information
The foundation of Mountain Park Dam consists of Cambrian  granite which has been intruded by diabase. The granite is hard,  fine to medium rystalline, pink to grayish pink, and weathered to a  depth of about 2 inches along joints near the surface. It is intricately  cut by joints, shear, and faults.

The canyon in which the dam is constructed is fault and joint controlled.  A fault zone approximately 62 feet wide is present in the canyon floor  and lies beneath the central portion of the dam. This zone is characterized  by sheared, pulverized, granular, slickensided diabase with some granite  between the diabase intrusions. The granite in this zone is hard to  soft and easily broken. The zone, known as the plug area, was over  excavated to a depth of 25 feet, backfilled with concrete, and then  grouted. Other areas of soft rock in the abutments and foundation  area were also over excavated to a minimum depth of 5 feet, then backfilled  with concrete. The foundation area and abutments were grouted before  placing concrete.

Last updated: Apr 02, 2013